Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Accelerator Pedal >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.




2. Remove the accelerator pedal upper nut (1).




3. Remove the lower accelerator nut cover (1) and the nut.
4. Lift the accelerator pedal off of the welded stud and out of the bracket.
5. Disconnect the accelerator pedal harness connector from the accelerator pedal.

INSTALLATION
1. Connect the accelerator pedal harness connector.




2. Slide the accelerator pedal into the bracket and onto the welded stud.
3. Install the accelerator pedal lower nut (1). Tighten to 15 N.m(11 ft. lbs.).
4. Install the plastic nut cover.




5. Install the accelerator pedal upper nut (1). Tighten to 15 N.m(11ft. lbs.).
6. Connect the negative battery cable.


pro multis · About Operation CHARM