Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair




REMOVAL
1. Disconnect the negative battery cable.




2. Disconnect the camshaft position sensor harness connector (1).
3. Remove the retaining bolt (2) and the camshaft position sensor.

INSTALLATION

NOTE: Lubricate the camshaft position sensor O-ring with engine oil.

1. Position the camshaft position sensor on the cylinder head.
2. Install the retaining bolt (2) and tighten to 8 Nm (71 in. lbs.).
3. Connect the camshaft position sensor harness connector.
4. Connect the negative battery cable.
pro multis · About Operation CHARM