Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Fluid Line/Hose >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fluid Line/Hose: Service and Repair

TRANSMISSION COOLER LINES REMOVAL





Note: To service the front copper transmission cooler lines (5) the radiator must be removed.

1. Raise and support the vehicle.
2. Remove the lower splash shield.
3. Disconnect the fittings at either end of the line being serviced.
4. Remove the line retainers (1) and the cooler line(s) as necessary.


INSTALLATION
1. Position the cooler line(s) and loosely connect the fittings.
2. Install the retainers and bolts for the cooler line(s).

Note: Replace the copper washers if the banjo bolts are removed.

3. Tighten the cooler line fittings or banjo bolts to 20 Nm (15 ft. lbs.).
4. Tighten the transmission cooler line retaining bolts to 10 Nm (89 in. lbs.).
5. Lower the vehicle.
6. Install the radiator if removed.
7. Check the transmission fluid level.
pro multis · About Operation CHARM