Shift Interlock: Adjustments

SHIFT INTERLOCK SOLENOID





ADJUSTMENTS - SHIFT INTERLOCK SOLENOID

1. Set the parking brake.
2. Remove the front center console.
3. Remove the shifter outer cover.
4. Set the selector lever to neutral. Lever must be touching the slot (arrow).
5. Energize the interlock solenoid (3).
6. Loosen the bolts (1).
7. Adjust the gap between the locking lever (4) and the cam plate (5) to 0.02 mm using the adjusting screw (2).
8. Tighten the bolts (1) to 3.5 Nm (31 inch lbs.).
9. Install the shifter outer cover.
10. Install the console.