Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> PT Cruiser L4-2.4L Turbo VIN 8 >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Combination Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Combination Switch: Service and Repair

REMOVAL
1. Open hood.

Battery Negative Cable Remove/install:




2. Disconnect and isolate the battery negative cable.
3. Remove both upper and lower steering column shrouds.

Multi-Function Switch Remove/Install:




4. Disconnect both posi-lock harness connectors at the rear of the multi-function switch
5. Remove multi-function switch mounting screws and remove switch from vehicle.

INSTALLATION

NOTE: If replacing the multi-function switch, the combination flasher and windshield wiper/washer switch must be transferred to new multi-function switch. Remove the two torx screws retaining the wiper/ washer switch, place next to the new multi-function switch and install two screws.

1. Place switch into place and install mounting screws. Torque multi-function switch to column retaining screws to 3 Nm (27 in. lbs.).
2. Connect both posi-lock harness connectors at the rear of the multi-function switch.
3. Install both upper and lower steering column shrouds.
4. Connect the battery negative cable.
5. Close hood.
6. Verify vehicle and system operation.
pro multis · About Operation CHARM