Without Air Conditioning

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Disconnect the blower motor wire harness connector.

Blower Motor - Without A/C, Typical:

3. Grasp the blower motor while pulling down on the locking tab. Turn the blower motor approximately 1/8 turn counterclockwise.
4. Remove the blower motor from the HVAC housing.

INSTALLATION
1. Position the blower motor into the housing.
2. Rotate the blower motor clockwise until the tab snaps into the locked position, approximately 1/8 turn.
3. Conned the blower motor wire harness connector.
4. Reconnect the negative battery cable.