Tail Lamp: Service and Repair

TAIL LAMP UNIT

REMOVAL

Tail And Stop Lamps:

1. Remove screw attaching tail lamp assembly to the aperture panel.
2. Slide the lamp assembly downward in the sheet metal opening.
3. Remove the lamp assembly from the vehicle.
4. Remove the bulb sockets from the lamp assembly by rotating the sockets counter-clockwise until free of the assembly.

INSTALLATION
1. Install the bulb sockets to the lamp assembly by rotating the sockets clockwise until fully seated.
2. Test operation of lamps.
3. Align the tail lamp assembly to the sheet metal opening.
4. Insert the lower positioning tab on the lamp assembly into the matching slot and rotate the lamp forward until the retaining clips snap into position.
5. Slide the assembly upwards within the sheet metal opening.
6. Install the screw to hold tail lamp assembly to the aperture panel.