Cabin Air Filter / Purifier: Service and Repair

REMOVAL
1. Remove the passenger side cowl grille screen.
2. Loosen the bolts that secure the windshield washer reservoir to the body.

NOTE: Removal of the reservoir is not necessary. Loosen reservoir just enough to allow access to the filter element.

3. Remove the filter element by lifting the filter element up and out of the housing.

INSTALLATION
1. Install filter element by inserting the element down directly into the element housing. The filter is held in place by friction between the filter element and the housing so no fasteners are used.
2. Position windshield washer reservoir and tighten the retaining bolts to 8 Nm (70 in. lbs.).
3. Install passenger side cowl grill screen.