Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Sebring Coupe L4-2.4L VIN G >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Reading and Clearing Diagnostic Trouble Codes >> Clearing Trouble Codes
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Clearing Trouble Codes

HOW TO READ AND ERASE DIAGNOSTIC TROUBLE CODES
Required Special Tools:
MB991502: Scan Tool (MUT-II)

CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991502.

NOTE: If the battery voltage is low, diagnostic trouble codes will not be output. Check the battery if scan tool MB991502 does not display.

NOTE: If the battery is disconnected or if the powertrain control module connector is disconnected, the diagnostic trouble codes will be erased. Do not disconnect the battery or powertrain control module before the diagnostic trouble codes have been read.





1. Connect scan tool MB991502 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Record the diagnostic trouble codes (DTCs) for A/T.
4. Refer to the Diagnostic Trouble Code Chart.
5. Turn the ignition switch to "LOCK" (OFF) and then back to "ON" again.
6. Erase the diagnostic trouble code by selecting DTC erase from SPECIAL MENU screen, using scan tool MB991502.
7. Check for diagnostic trouble codes. Confirm that scan tool MB991502 displays "normal."
8. Turn the ignition switch to the "LOCK" (OFF) position.
9. Disconnect scan tool MB991502.
pro multis · About Operation CHARM