Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2005 >> 300 V6-2.7L VIN R >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Bumper: Service and Repair

BUMPER-FRONT

REMOVAL

NOTE: 300 Shown. Magnum and Charger similar.




1. Remove fascia assembly. Refer to Front Bumper.
2. Drill out the four spot welds (2 per side) between the bumper bracket and rail end cap (1).
3. Remove the eight screws (4 per side) and remove the bumper.

INSTALLATION

NOTE: 300 Shown. Magnum and Charger similar.




1. Position the bumper.

NOTE: It is not necessary to spot weld the bumper back into place.

2. Install the bolts and tighten to 28 N.m (21 ft.lbs.).
3. Install the fascia.
pro multis · About Operation CHARM