Service Procedure

1. Open the hood.





2. Remove both upper radiator closure panels (Figure 1).





3. Remove the left and right upper radiator isolator bracket bolts (Figure 2).

4. Remove the left and right upper side shield retainers and pull the side shields away from the isolator brackets (Figure 2).

5. Tilt the radiator forward and remove the left and right radiator isolator brackets (Figure 2).

6. Install the new isolator brackets and tilt the radiator back into position (Figure 2).

7. Install the isolator bracket bolts (Figure 2). Tighten the bolts to 125 in-lbs (14 N.m).

8. Position the radiator side shields and install the shield retainers.

9. Install both upper radiator closure panels (Figure 1). Ensure that the panels are interlocked where they meet in the center.