Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Drive/Propeller Shaft
SPECIFICATIONS CENTERING SLEEVE SPECIFICATIONS RUNOUT SPECIFICATIONS Note: Measure front/rear runout approximately
3 inches (76 mm) from the weld seam at each end of the shaft tube for tube lengths over 30 inches. For tube lengths under 30 inches the maximum allowed runout is
0.020 in. (0.50 mm) for the full length of the tube.
TORQUE SPECIFICATIONS
