Power Seat Control Module: Service and Repair

REMOVAL
1. Position the drivers seat as far upward and rearward as possible.
2. Open hood, disconnect and isolate the negative battery cable.
3. Remove the memory heated seat adjustable pedal module attaching screws.
4. Disconnect the module electrical connectors.
5. Remove the module from under drivers seat.

INSTALLATION
1. Position the memory heated seat adjustable pedal module under the drivers seat.
2. Connect the module electrical connectors.
3. Install the module attaching screws.
4. Connect the negative battery cable.
5. Position the drivers seat in its original position.
6. Verify correct system operation.