Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2005 >> Pacifica V6-3.8L VIN L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair >> Rear Blower Motor Power Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Blower Motor Power Module

REMOVAL
1. Remove the rear center console upper cover.
2. Disconnect and isolate the negative battery cable.

Blower Motor Power Module:




3. Disconnect the body wire harness connector from the rear blower motor power module.
4. Disconnect the rear blower motor wire harness connector from the power module.
5. Remove the two screws that secure the power module to the rear blower motor housing.
6. Remove the power module from the blower motor housing.

INSTALLATION
1. Position the rear blower motor power module into the rear blower motor housing.
2. Install the two screws that secure the power module to the blower motor housing. Tighten the screws to 2 N.m (17 in. lbs.).
3. Reconnect the blower motor wire harness connector to the power module.
4. Reconnect the body wire harness connector to the power module.
5. Reconnect the negative battery cable.
6. Install the front center floor console cover.
pro multis · About Operation CHARM