Trunk Lamp: Service and Repair

REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
2. Open liftgate.

Liftgate Lamp Lens - Removal:

3. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on door courtesy lamp lens and remove from trim panel.

Liftgate Lamp - Removal:

4. Gently pry up on the edge of the lamp and pull out of the liftgate lamp unit to remove.

INSTALLATION
1. Place lamp over retaining clips in liftgate lamp unit retaining dips and firmly snap into place.
2. Place the liftgate lamp lens over the retaining pins making sure that they are lined up and them firmly snap into place .
3. Close liftgate.
4. Connect the battery negative cable.
5. Close hood.
6. Verify vehicle and system operation.