Computers and Control Systems: Tools and Equipment

REQUIRED TOOLS AND EQUIPMENT
Diagnostic Pinout Box #8815
DRBIII(R) (diagnostic read-out box) scan tool
Evaporative Emissions Leak Detector #8404
Evaporative System Diagnostic Kit #6917
fuel filler adapter #8382
fuel pressure adapter (C-6631) or #6539
fuel pressure kit (C-4799-B) or #5069
fuel release hose (C-4799-1)
jumper wires
Min Air flow fitting #6714
ohmmeter
oscilloscope
Pinout Box (Miller #8815)
Terminal Removal Tool #3638
Vacuum gauge
voltmeter
12 volt test light minimum 25 ohms resistance with probe #6801

CAUTION: A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.

- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal