Sunroof / Moonroof Module: Service and Repair

REMOVAL
1. Remove the sunroof assembly.
2. Remove the sunroof motor/module retaining bolts and remove the motor/module from the vehicle.

INSTALLATION

CAUTION: THE SUNROOF MOTOR/MODULE MUST BE TIMED WITH THE SUNROOF ASSEMBLY. FAILURE TO DO SO WILL RESULT IN IMPROPER SUNROOF OPERATION AND POSSIBLE LEAKAGE OR DAMAGE TO THE ASSEMBLY.

1. Assure proper sunroof motor/module timing before installation.
2. Position the sunroof motor/module to the sunroof assembly and install the retaining bolts. Tighten sunroof motor/module retaining bolts to 4.2Nm (40 lbs.in.).
3. Connect the timed sunroof assembly to a power source and assure proper operation before installing the sunroof assembly into the vehicle.
4. Install the sunroof assembly in the vehicle.