Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2005 >> Pacifica V6-3.8L VIN L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair >> Controller Antilock Brake (MK25)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Controller Antilock Brake (MK25)

REMOVAL
1. Disconnect negative (-) battery cable from battery post and isolate.
2. Raise and support vehicle.

CAB Attaching Screws:




3. Remove 3 screws attaching CAB to HCU.

CAB Removal/Installation:




4. Slide CAB off HCU.

CAB Wiring Connector:




5. Disconnect 47-way wiring connector at CAB.
6. Remove CAB.

INSTALLATION
1. Connect 47-way wiring connector at CAB.
2. Align CAB solenoids and pump/motor wiring connector with HCU valves and connector passage. Slide CAB onto HCU.
3. Install 3 screws mounting CAB to HCU. Tighten CAB mounting screws to 2 N.m (17 in. lbs.) torque.
4. Lower vehicle.
5. Connect negative battery cable to battery post.
6. Hook up DRBIII(R) to initialize CAB. Check and clear any faults.
pro multis · About Operation CHARM