Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2005 >> Sebring Convertible L4-2.4L VIN X >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Temperature Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the center console.
3. Disconnect the center console wire harness connector from the connector receptacle on the back of the heated seat switch.
4. Remove the heated seat switch by depressing the retaining tabs and pushing straight out of the center console.

INSTALLATION

NOTE: Be certain to install the switch in the correct orientation, drivers switch on the left and passenger on the right.

1. Connect the center console wire harness connector on the connector receptacle on the back of the heated seat switch.
2. Verify switch/system operation.
3. Install the center console.
4. Install the heated seat switch in the center console mounting hole.
5. Reconnect the battery negative cable.
pro multis · About Operation CHARM