Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2006 >> 300 V6-2.7L VIN R >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Fluid Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Fluid Pressure Sensor/Switch: Service and Repair

BRAKE PRESSURE SENSOR

REMOVAL





1. Disconnect wiring harness (6) connector from pressure sensor (5).





2. Remove pressure sensor (1) on bottom of master cylinder.

INSTALLATION





1. Install pressure sensor (1) on bottom of master cylinder. Tighten sensor to 28 Nm (250 inch lbs.) torque.





2. Connect wiring harness (6) connector to pressure switch (5).





3. Fill master cylinder fluid reservoir (1) with clean, fresh Mopar� Brake Fluid or equivalent.
4. Perform Verification Test and clear any faults.
pro multis · About Operation CHARM