Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2006 >> 300 V8-5.7L VIN H >> Repair and Diagnosis >> Lighting and Horns >> Ambient Light Sensor >> Service and Repair >> Rain Sensor Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rain Sensor Module

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Disconnect the electrical connector.
3. Using a small screwdriver or equivalent, from the top (connector side) push in the tabs until the slider protrudes from the opposing (bottom) side of the sensor case.
4. Gently pull each slider (1) slightly more until the cam lock releases the sensor.

INSTALLATION




1. Make sure that the slider locks are positioned correctly in the downward position, sticking out of the side opposite the connector.
2. Position the rain sensor below the inside rear view mirror, over the bracket and gently push down to seat it on the bracket.
3. Push the slider cam locks (1) inward until they are flush with the side of the sensor case.
4. Connect the wire harness connector to the sensor.
5. Connect the battery negative cable.

pro multis · About Operation CHARM