Fog/Driving Lamp: Service and Repair

FOG LAMP UNIT

REMOVAL




1. Remove fasteners attaching lower splash shield (2) to gain access to the rear of the fog lamp.




2. Disconnect wire connector (2) from fog lamp unit (1).




3. Remove four screws (1) attaching fog lamp unit to fascia.
4. Remove lamp unit from fascia.

INSTALLATION

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.




1. Place fog lamp unit into position.
2. Install the four screws (1) attaching fog lamp unit to fascia.




3. Connect wire connector (2) to the fog lamp unit (1).




4. Install lower splash shield (2).