Shift Crossover Shaft

T350 MANUAL TRANSAXLE

SHIFT CROSSOVER SHAFT

REMOVAL

(1) Disassemble transaxle.
(2) With the transaxle disassembled, remove the crossover shaft seal.
(3) Using snap-ring pliers, remove the snap ring

Fig.116 Crossover Shaft Snap Ring:

(3) (Fig. 116) at the crossover shaft bore.
(4) Push the crossover shaft (2) in the case and remove the crossover assembly

INSTALLATION

Fig.117 Crossover Shaft Snap Ring:

(1) Install crossover shaft to case and install snap ring (3) (Fig. 117).
(2) Install the crossover shaft seal.
(3) Assemble transaxle.