Shift Selector Shaft Bushing

T350 MANUAL TRANSAXLE

SHIFT SELECTOR SHAFT BUSHING

REMOVAL
(1) Remove selector shaft.

Fig.119 Selector Shaft Bushing Removal:

(2) Thread Remover 6786 (1) (Fig. 119) into bushing.
(3) Install slide hammer C-3752 (3) onto tool and remove bushing (2) using slide hammer.

INSTALLATION
(1) Position replacement bushing over selector shaft bore.

Fig.120 Selector Shaft Bushing Installation:

(2) Using an appropriate size deep-well socket (1) (Fig. 120), install bushing (2) in selector shaft bore.