Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2006 >> Sebring Sedan V6-2.7L VIN R >> Repair and Diagnosis >> Windows and Glass >> Windows >> Window Regulator >> Service and Repair >> Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear

WINDOW REGULATOR

REMOVAL
1. Remove door waterdam.
2. Remove glass from regulator roller channel. Secure glass in the up position in the door frame.
3. Disconnect power window motor wire connector, if equipped.

Rear Door Regulator:




4. Loosen screw attaching regulator scissor channel to door panel.
5. Remove screw and bolt heads from keyhole slots in door panel.
6. Loosen bolts attaching regulator to door panel.
7. Remove regulator from door panel.
8. Slide regulator rearward and rotate forward end of roller channel through access hole in door panel.

INSTALLATION
1. Position regulator on door panel through access hole in door panel.
2. Tighten bolts attaching regulator to door panel.
3. Install screw and bolt heads on scissor channel to keyhole slots in door panel.
4. Tighten screw attaching regulator scissor channel to door panel.
5. Connect power window motor wire connector, if equipped.
6. Position glass to regulator roller channel.
7. Tighten fasteners attaching door glass to roller channel.
8. Install door waterdam.
pro multis · About Operation CHARM