Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> 300 V6-2.7L VIN R >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION

FRONT IMPACT SENSOR





1. Position the front impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).

2. Connect the electrical connector (3).

NOTE: If replacing the left front impact sensor, the air intake system needs to be installed.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

SIDE IMPACT SENSOR

B-PILLAR MOUNTED SIDE IMPACT SENSOR





1. Position the B-pillar mounted impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).

2. Connect the electrical connector (1).

3. Install the B-pillar trim panel.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

C-PILLAR MOUNTED SIDE IMPACT SENSOR





4. Position the C-pillar mounted impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).

5. Connect the electrical connector (3).

6. Install the C-pillar trim panel.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
pro multis · About Operation CHARM