Removal

REMOVAL




1. Remove the trim panel from the inside of the front door. Refer to Trim Panel.

2. Remove the speaker from the inside of the front door.

3. Remove the inner belt weatherstrip from the front door.

4. Remove the watershield from the inside of the front door. Refer to Front Door Panel.

5. Using the regulator, adjust the front door glass (1) position up or down as required for access to the two window regulator glass clamps (3).

6. Loosen the screw (3) in each of the glass clamps far enough to release the glass.





7. From the outside of the front door, lift the glass (1) upward far enough to disengage it from the two glass clamps (2).

8. Lift the rear side of the glass upward and out from the top of the door shell first to unload the glass from the door.