Installation

INSTALLATION




1. From the outside of the front door, insert the front side of the glass (1) into the top of the door shell first to load the glass into the door.

2. Engage the glass into the two window regulator glass clamps (2).





3. Using the regulator, lower the window as required for access to the two window regulator glass clamp screws (2).

4. Tighten the screw in each of the glass clamps. Tighten the screws to 10 Nm (90 in. lbs.).

5. Reinstall the watershield onto the inside of the front door.

6. Reinstall the inner belt weatherstrip onto the front door.

7. Reinstall the speaker onto the inside of the front door.

8. Reinstall the trim panel onto the inside of the front door.