Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Lighting and Horns >> Backup Lamp >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal






LAMP

NOTE: The appearance of the Dodge and Chrysler rear lamp units is unique, but the service procedures for removing and installing either lamp are the same.





1. Disconnect and isolate the battery negative cable.

2. Open the liftgate to access and remove the two plastic push-pin fasteners (3) that secure the rear lamp unit (2) to the side jamb of the liftgate opening pillar (1).





3. Pull the outboard side of the rear lamp unit rearward far enough to unsnap the two ball studs on the outboard side of the lamp housing from the two rubber grommets (4) in the quarter panel (3).

4. Disengage the lock feature and disconnect the wire harness connector (2) from the lamp socket plate connector (1) (Dodge), or the lamp pigtail wire connector (Chrysler).

5. Remove the lamp from the lamp opening of the quarter panel.

pro multis · About Operation CHARM