Removal

LAMP





1. Disconnect and isolate the battery negative cable.

2. Remove the fasteners that secure the front of the front fender wheel house liner to the bottom of the front fascia.

3. Pull the front of the front fender liner rearward far enough to access the back of the front fascia.

4. Reach under and behind the front fascia to access the front fog lamp housing on the back of the front bumper support.

5. Disconnect the wire harness connector (4) from the fog lamp bulb connector receptacle (1).

6. Remove the two screws (3) that secure the lamp to the back of the fascia.

7. Remove the lamp from the seat in the face of the front fascia.