Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Lighting and Horns >> Trunk Lamp >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






LAMP

NOTE: Two versions of the liftgate lamp are available: one using an incandescent bulb for illumination, and one using a Light Emitting Diode (LED) unit for illumination. The external appearance of the two liftgate lamp units is the same as are the service procedures for removing and installing the lamp or the lamp lens. Only the light source is different.





1. Position the liftgate lamp unit (3) to the lamp seat in the liftgate trim panel (1).

2. Reconnect the wire harness connector (2) to the back of the lamp housing.

3. Align the latch tabs on the back of the lamp housing with the receptacles in the trim panel.

4. Using hand pressure, press firmly and evenly on the lamp lens until the lamp snaps into the trim panel.

5. Reconnect the battery negative cable.

pro multis · About Operation CHARM