Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Control Arm Bushing >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






LOWER CONTROL ARM BUSHINGS

LARGE BUSHING FRONT PART OF THE CONTROL ARM






NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper operation during the removal and installation process.

1. Install the new bushing (4) into the control arm (3) using special tools C4212-F (Press)(1), 9334-3 (Bushing installation depth spacer)(2), 9334-1 (driver)(5) as shown.

SMALL BUSHING TORSION BAR SIDE





1. Install the new bushing (4) into the lower control arm (3) using tools C4212-F (Press)(1), 9334-3 (Bushing installation depth spacer), 9334-2 (Driver) as shown.
2. Remove the control arm from the vise.
3. Install the lower control arm.
4. Reset the vehicle ride height.
5. Perform a wheel alignment.
pro multis · About Operation CHARM