Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Route the transmission end of the gearshift cable (1) through the opening in the dash panel.
2. Seat the cable grommet (2) into the dash panel opening.




3. Snap the cable into the steering column (1) bracket so the retaining ears are engaged and snap the cable eyelet onto the shift lever ball stud.
4. Raise the vehicle.
5. Place the transmission manual shift lever in the "PARK" detent (rearmost) position and rotate prop shaft to ensure transmission is in PARK.




6. Route the gearshift cable (1) through the transmission mounting bracket (2) and secure the cable by snapping the cable retaining ears into the transmission bracket and snapping the cable eyelet on the manual shift lever (3) ball stud, RLE transmission equipped vehicles.




7. Route the gearshift cable (1) through the transmission mounting bracket and secure the cable by snapping the cable retaining ears into the transmission bracket and snapping the cable eyelet on the manual shift lever (3) ball stud, RFE transmission equipped vehicles.




8. Lower vehicle.
9. Lock the shift cable adjustment by pressing the cable adjuster lock tab (3) downward until it snaps into place.
10. Check for proper operation of the transmission range sensor.
11. Adjust the gearshift cable as necessary.
pro multis · About Operation CHARM