Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Install the lever assembly (2) using care to install the pin in the blocker to slider slot (1) and install the mounting screws and tighten to 12 Nm (105 in. lbs.).
2. Cycle the key from ACC to RUN and ensure that the blocker does not stick or bind.
3. Turn the key to the OFF position and ensure that the shifter will not pull from the PARK position.
4. Connect the tow/haul switch harness.

NOTE: Route and tie off harness to original location.

5. Connect the shift cable to the lever.
6. Ensure the gear shift lever and transmission are in the PARK position and snap the cable adjust clip in place.




7. Install a new brake light switch (5).
8. Install the SKIM and halo.
9. Install the upper (1) and lower (3) column shroud.
10. Install the tilt lever knob.
11. Install the column back into place and tighten the four nuts to 28 Nm (250 in. lbs.).




12. Install the steering column opening reinforcement (1).




13. Install the steering column opening cover (2).
pro multis · About Operation CHARM