Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 4WD V8-5.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Removal - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal - Front






REMOVAL

WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury or death.





1. Disconnect and isolate the negative battery cable.

2. Remove the right front door scuff plate.

3. Remove the right cowl side trim panel.

4. Disconnect the wire harness connector (1) from the blower motor (2).

5. Remove the three screws (3) that secure the blower motor and blower wheel assembly to the HVAC housing (4).

6. Remove the blower motor and blower wheel assembly from the HVAC housing.
pro multis · About Operation CHARM