Removal

REMOVAL




1. Drain transmission oil by unscrewing oil drain plug (8), if equipped.




2. Move selector lever to position "P".
3. Raise vehicle.
4. Remove bolt (3) and screw (1) holding the heat shield (2) to the transmission.




5. Disconnect 13-pin plug connector (1). Turn bayonet lock of guide bushing (2) anti-clockwise.
6. Loosen guide bushing (2) and remove from transmission housing.




7. Detach oil pan (5).
8. Remove oil filter (4).
9. Unscrew Torx socket bolts (3) and remove electrohydraulic control module (2).