Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Spray Nozzle >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION





1. Install the washer nozzle (1) into the cowl grille (2). Press downward with a rocking motion until the retaining clip is fully seated.





2. Slide the washer hose clamps (1) onto the washer hose (2).

3. Install the washer hose (2) over the washer nozzle (3).

4. Tighten the washer clamps (1) onto the washer nozzle (3) allowing approximately 0.78 inch (20 mm) clearance between the washer hoses.





NOTE: If the main washer nozzle harness connector (1) was disconnected, reconnect at this time.

5. Connect the washer nozzle harness connector (2).





6. Connect the washer nozzle harness connector (s) (1-2) to the thermoswitch. Install the thermoswitch into the cowl grill.

7. Install the cowl grille.
pro multis · About Operation CHARM