Convertible

CONVERTIBLE




1. Install latches (2), if necessary. Place latch(s) (2) into position and install attaching bolts. Tighten bolts (3) to 12.5 Nm (110 in. lbs.).





2. Ensure latches are in the open position. With a rod (1) into the hole to support latching devise in the open position.

3. Insert rear seat(s) into position and remove rods.





4. Install latch covers (1).





5. With rear seat(s) in the upright position install screws (2) attaching check strap(s) (1).





6. Place rear seat (1) back into position.