Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Installation
2.4L TURBO 1.
Install O2 sensor (3) using an
oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent and tighten to
41 Nm (30 ft. lbs.).
2.
Route O2 sensor wire above the heat shield (4) for the generator and away from the exhaust manifold.
3.
Lower vehicle.
4.
Connect and lock the O2S connector (1). It is on the passenger side near the EVAP purge solenoid.
5.
Connect the negative battery cable.
