Front Floor Console

FRONT FLOOR CONSOLE

REMOVAL

1. Remove shift bezel.

Fig. 13:

2. Remove transmission range indicator surround bezel (Fig. 13).

Fig. 14:

3. Remove two screws attaching front floor console to the lower instrument panel (Fig. 14).
4. Open cup holder and remove two attaching screws to bottom of cup holder.
5. Open bin and remove two attaching screws to bottom of bin.
6. Remove front floor console sidewall attaching screws, three per side.
7. Raise front floor console and disconnect wiring harness.
8. Remove front floor console from vehicle.

INSTALLATION

1. Place front floor console into position (Fig. 14).
2. Raise front floor console and connect wiring harness.
3. Install front floor console sidewall attaching screws, three per side.
4. Install two attaching screws to bottom of bin.
5. Install two attaching screws to bottom of cup holder.
6. Install two screws attaching front floor console to the lower instrument panel.
7. Install transmission range indicator surround bezel (Fig. 13).
8. Install shift bezel.