Switch-Driver Seat

DRIVER SEAT SWITCH
1. Remove the driver seat switch assembly.

2. Using an ohmmeter, check the appropriate ground circuit cavity of the driver seat switch connector for continuity to ground. It should be present. If OK go to STEP 3. If NOT OK repair the open ground circuit as required.

3. Using a voltmeter, check the appropriate 12v circuit cavity of the power seat switch connector for approx. 12v. It should be present. If OK go to STEP 4. If NOT OK repair the open voltage supply circuit as required.

4. Using an ohmmeter, check the power seat switch resistance values, using the seat switch connector receptacle. If the values do not match those specified in the DRIVER SEAT SWITCH TESTING TABLE, replace the driver seat switch.