Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Pacifica V6-3.8L VIN L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Lateral Accelerometer >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION





NOTE: When installed, arrow on dynamics sensor housing must point towards front of vehicle.

1. Install dynamics sensor (2) over studs mounted to floor pan tunnel (4).
2. Install two mounting nuts (1). Tighten nuts to 9 Nm (80 in. lbs.).
3. Connect wiring harness connector (3) to dynamics sensor (1).




4. Install foam isolator (3). Make sure isolator is positioned properly over shifter cables (1) and dynamics sensor.




5. Install floor distribution air duct (2) and fastener (1).




6. Install right side front floor console closeout panel (2) and fastener (1).
7. Install front floor console.
8. Connect battery negative cable to battery post.
9. Perform Verification Test and clear any faults. Verification Tests
pro multis · About Operation CHARM