Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Pacifica V6-3.8L VIN L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Wheel Speed >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION

1. Apply bearing grease (supplied with part) to sensor head shaft and O-ring.

CAUTION: Ensure that sensor mounting surface on bearing is clean before sensor installation.




2. Push sensor head (4) into mounting hole in hub and bearing (2) and align mounting screw hole.
3. Install NEW mounting screw (1). Tighten mounting screw to 6 Nm (55 in. lbs.).
4. Place wheel speed sensor cable grommet into routing clip (3) at knuckle and close clip or push routing clip on cable into mounting hole in knuckle.�




5. Attach wheel speed sensor routing bracket (3) to strut assembly (1). Tighten screw (2) to 13 Nm (115 in. lbs.).




6. Clip wheel speed sensor connector and routing clip (3) to frame rail outer reinforcement.
7. Connect vehicle wiring harness (1) to wheel speed sensor connector (2).
8. Install brake rotor as well as all components necessary to access it.
9. Verify that wheel speed sensor cable is properly routed and not coming into contact with rotor or other moving parts.
10. Road test vehicle to ensure proper operation of the base brakes and ABS.
pro multis · About Operation CHARM