Removal

FOG LAMP UNIT




1. Disconnect and isolate the battery negative cable.

NOTE: It will be necessary to loosen the lower portion of the inner splash shield to gain access to the fog lamp.

2. Remove the push pin fasteners to the lower fascia/belly pan and remove belly pan from fascia.

3. Remove the two retaining screws (4) from the fog lamp unit (2) behind the fascia (3).

4. Pull fog lamp unit (2) straight out of front fascia.

5. Disconnect the electrical connection (1) to the fog lamp and separate from vehicle.

NOTE: If replacing fog lamp unit with new, the fog lamp must be transferred to the new unit.