Removal

REMOVAL

1. Release the fuel pressure.

2. Disconnect negative battery cable.

3. Remove fuel tank.

4. Vacuum area before removing module lock ring.

5. Disconnect vapor line and electrical connector.




6. Module lock ring contact points.




7. Remove module lock ring.

NOTE: Use a brass punch to remove the 1/4 turn lock ring.

8. Remove module top.

9. Tip module on to its side to drain fuel from reservoir in module.

10. Drain fuel tank, use an approved gasoline draining station.

11. Disconnect electrical connector for fuel level sending card.




12. Remove fuel level sending card by prying on locking tab and pulling card down toward bottom of the pump module.




13. There are 2 locking tabs on sending card; one on the front and one on back.