Removal

2.0L/2.4L ENGINE





NOTE: Before proceeding, Refer to Service Precautions.

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the engine appearance cover.
3. Remove the pressure hose (3) at the pump pressure port (5).
4. Remove the pressure hose routing bracket bolt (2) at the upper mount (8).
5. Raise and support the vehicle.




6. Remove the return hose (1) at the return tube (2). Allow fluid to drain.




7. Remove the routing clamp screw (1) securing the pressure hose (2) to the right side of the crossmember (3).




8. Unscrew the tube nut (3), then remove the pressure hose (4) at the steering gear.




9. Remove the screws (1) securing the power steering hose routing clamps (2) to the rear of the crossmember (3).
10. Remove the power steering pressure hose from the vehicle.