Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Sebring Sedan V6-2.7L Flex Fuel >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation




Cruise Control Switch Installation

The speed control switch is mounted in the steering wheel and wired through the dock spring device under the airbag module.

WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO RESTRAINT SYSTEMS. Restraints and Safety Systems

Speed Control Switch:






1. Connect the electrical connector.

Switch Removal:






2. Install switch and tighten the screws to 1.6 Nm (15 in. lbs). Make sure rubber seal is in place around switch.

Switch Top Mounting Screw:






3. Install airbag, refer to the Restraint Systems. Restraints and Safety Systems

4. Install the negative battery cable.
pro multis · About Operation CHARM