Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> 300 V6-2.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Brake Pedal Assy >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







PEDAL





1. Install adjustable brake pedal assembly (4) under instrument panel and slide over booster push rod.
2. From engine compartment side, push power brake booster (3) mounting studs back through dash panel (2) and brake pedal bracket.
3. Install two upper mounting nuts (1) fastening pedal bracket to upper dash panel (2). Do not tighten at this time.
4. Install four power brake booster mounting nuts (1). Tighten nuts to 25 Nm (18 ft. lbs.) torque.
5. Tighten two upper mounting nuts (1) to 25 Nm (18 ft. lbs.) torque.




6. Slide booster push rod (5) onto brake pedal pin (4). Install NEW retaining clip (3) securing push rod to brake pedal.
7. Install and adjust brake lamp switch (2). Installation
8. Install steering column opening cover. Steering Column Opening Cover - Installation
9. Install driver side silencer under instrument panel.Silencer Panel - Installation




10. Connect battery negative cable (2) to battery post. It is important that this is performed properly. Battery Reconnection
11. Road test vehicle testing operation of brakes.
pro multis · About Operation CHARM