Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> 300 V6-2.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Hydraulic System Junction Block >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





1. Install junction block (5), pushing mounting bracket down into mounting grommets (8) located in body of vehicle.




2. Install brake tubes to rear (1 and 3) at hydraulic control unit. Tighten tube nuts to 20 Nm (177 in. lbs.) torque.




3. Install brake tubes (1, 2, 3 and 10) at junction block (5). Tighten tube nuts to 20 Nm (177 in. lbs.) torque.
4. Remove brake pedal holding tool.




5. Connect battery negative cable (2) to battery post. It is important that this is performed properly. Battery Reconnection




6. Fill and bleed (1) base brake hydraulic system. Brake Bleeding
7. Road test vehicle to verify proper operation of brakes.
pro multis · About Operation CHARM