Installation

INSTALLATION





1. Install o-ring.




2. Install ground ring.




3. Install Fuel Regulator and ground ring. Note location of ground ring.




4. Install ground wire.




5. Install Fuel Pressure Regulator retaining clip.




6. Install module into tank.




7. Align marks on the module for proper orientation.




8. Install module lock-ring.
9. Use special tool #9340 to tighten right side module lock ring.
10. Connect the fuel supply line to module.




11. Install plastic access covers to floor pan right side.




12. Fold the foam pad covering access cover for modules back into place.




13. Install rear lower seat cushion




14. Rear lower seat cushion installed.




15. Fill fuel tank.
16. Connect negative battery cable.
17. Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.